TSA-N +Tige +Ecrou H /Zn
- Multi-material dowel 2 segments /galvanised + threaded rod + nut Hu /galvanised pre-assembled.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
Advantages
- Multi-material anchor.
Technical characteristics
| Type of load |
Medium load |
| Load recovery |
400 Kg |
| Installation mode |
Hammer laying Wrench tightened |
| Supporting material |
Concrete Solid brick Hollow concrete block Solid concrete block Natural stone with prior testing Hollow brick with prior testing |
| Minimum drilling depth |
45 50 60 65 |
| Product material |
Zinc-plated steel class 5-8 |
| Minimum depth of implementation |
35 40 50 55 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
100 |
| Effective anchoring depth |
29 34 44 46 |
| Maximum thickness of the element to be fixed |
10 25 30 37 49 5 56 57 79 92 |
| Content |
10 zinc-plated dowels M12/56x111 +10 zinc-plated threaded rods +10 pre-assembled zinc-plated nuts H18. 10 zinc-plated dowels M12/92x147 +10 zinc-plated threaded rods +10 pre-assembled zinc-plated nuts H18. 100 zinc-plated dowels M6/5x40 +100 zinc-plated threaded rods +100 pre-assembled zinc-plated nuts H10. 20 zinc-plated dowels M10/49x99 +20 zinc-plated threaded rods +20 zinc-plated nuts H15 pre-assembled. 20 zinc-plated dowels M10/79x129 +20 zinc-plated threaded rods +20 pre-assembled zinc-plated nuts H15. 20 zinc-plated dowels M12/10x65 +20 zinc-plated threaded rods +20 pre-assembled zinc-plated nuts H18. 25 zinc-plated dowels M10/25x75 +25 zinc-plated threaded rods +25 pre-assembled zinc-plated nuts H15. 50 zinc-plated dowels M6/30x65 +50 zinc-plated threaded rods +50 pre-assembled zinc-plated nuts H10. 50 zinc-plated dowels M8/10x50 +50 zinc-plated threaded rods +50 pre-assembled zinc-plated nuts H13. 50 zinc-plated dowels M8/37x77 +50 zinc-plated threaded rods +50 pre-assembled zinc-plated nuts H13. 50 zinc-plated dowels M8/57x97 +50 zinc-plated threaded rods +50 pre-assembled zinc-plated nuts H13. |
| Internal diameter |
M10 M12 M6 M8 |
| Generic code | L
(mm)
Length
|
d0
(mm)
Support drilling diameter
|
Hnom
Minimum depth of implementation
|
Hmin
Minimum thickness of base material
|
Hef
Effective anchoring depth
|
|
| 359345TSA-N M8/10x50 | 50 | 10 | 40 | 100 | 34 | |
| 359350TSA-N M10/25x75 | 75 | 12 | 50 | 100 | 44 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover