TSA-N M10/25x75
Generic code 359350
- 2 piece zinc-plated multi-material anchor M10/25x75 with pre-mounted zinc-plated threaded rod and H15 nut.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
Advantages
- Multi-material anchor.
Technical characteristics
| Type of load |
Medium load |
| Load recovery |
400
Kg |
| Drive |
15
mm |
| Installation mode |
hammer laying wrench tightened |
| Length |
75
mm |
| Support drilling diameter |
12
mm |
| Supporting material |
Solid brick Hollow brick with prior testing Hollow concrete block Solid concrete block Concrete Natural stone with prior testing |
| Minimum drilling depth |
60 |
| Product material |
Zinc-plated steel class 5-8 |
| Minimum depth of implementation |
50 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
100 |
| Effective anchoring depth |
44 |
| Maximum thickness of the element to be fixed |
25 |
| Flange head diameter |
21.8
mm |
| Hex. Head |
15
mm |
| Diameter of the passage hole |
13
mm |
| Required tightening torque |
30
Nm |
| Content |
25 zinc-plated dowels M10/25x75 +25 zinc-plated threaded rods +25 pre-assembled zinc-plated nuts H15. |
| Outside body diameter |
12
mm |
| Internal diameter |
M10 |
| Diameter on thread |
10
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover