METAL ISO PIEUVRE CC 12/195 Tfix 125/150
Generic code 218438
- Zinc-plated one-piece screw-in anchor 12/150x195 with wide head Ø38 for rigid insulation, mounted with metal screw with domed head.
Applications
- Intended use: Hollow materials, hollow bricks, hollow breeze blocks, hollow core slab.
- Insulation anchor for holding rigid insulation under slabs (hollow material ceilings): garage, boiler room, basement, stairwell, passageway, etc.
Advantages
- Screw-in anchor for hollow materials with metal screw.
- “Non-combustible” reaction to fire testing compliant with the European Norm EN 13-501-1 (Euroclass).
- Large 38 mm head.
- 3 anti-rotation anchor grips.
- Quick and easy to fit: Screw expansion or Bolid expansion tool (code : 218 425).
- Use with an additional Ø80 mm washer for flexible mineral wool and wood fibre insulation.
Technical characteristics
With flange |
True |
Installation mode |
inslallation with cruciform screwdriving |
Type of flange |
Large |
Flange head diameter |
38
mm |
Supporting material |
Hollow brick Hollow concrete block |
Product material |
Zinc plated steel |
Support drilling diameter |
12
mm |
Pre-assembled product |
True |
Maximum thickness of the element to be fixed |
150 |
Length |
195
mm |
Minimum drilling depth |
55 |
Minimum depth of implementation |
45 |
Content |
100 dowels Ø12/150x195 zinc-plated +100 pre-mounted zinc-plated screws. |
Outside body diameter |
12
mm |
Accessory's length |
200
mm |
Internal diameter |
M8 |
Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover-
Technical Data Sheet METAL ISO OCTOPUS CC AnchorTechnical datasheets
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF METAL-ISO CCTechnical drawings
This document is reserved for our connected customers,
log in or create an account to download it.