METAL-ISO CC +Vis /Zn
- One-piece form-locking dowel /zinc plated with wide head Ø38 + pre-mounted metal screws with Phillips head /zinc plated, special for hollow materials for rigid insulation.
Applications
- Intended use: Hollow materials, hollow bricks, hollow breeze blocks, hollow core slab.
- Insulation anchor for holding rigid insulation under slabs (hollow material ceilings): garage, boiler room, basement, stairwell, passageway, etc.
Advantages
- Screw-in anchor for hollow materials with metal screw.
- “Non-combustible” reaction to fire testing compliant with the European Norm EN 13-501-1 (Euroclass).
- Zinc-plated steel product, therefore fire resistant.
- Large 38 mm head.
- 3 anti-rotation anchor grips.
- Quick and easy to fit: Screw expansion or Bolid expansion tool (code : 218 425).
- Use with an additional Ø80 mm washer for flexible mineral wool and wood fibre insulation.
Technical characteristics
| With flange |
True |
| Installation mode |
Inslallation with cruciform screwdriving |
| Type of flange |
Large |
| Flange head diameter |
38 mm |
| Supporting material |
Hollow brick Hollow concrete block |
| Product material |
Zinc plated steel |
| Support drilling diameter |
12 mm |
| Pre-assembled product |
True |
| Maximum thickness of the element to be fixed |
100 125 150 60 80 |
| Minimum drilling depth |
55 |
| Minimum depth of implementation |
45 |
| Content |
100 dowels Ø12/100x145 zinc-plated +100 pre-mounted zinc-plated screws. 100 dowels Ø12/125x170 zinc-plated +100 pre-mounted zinc-plated screws. 100 dowels Ø12/150x195 zinc-plated +100 pre-mounted zinc-plated screws. 100 dowels Ø12/60x105 zinc-plated +100 pre-assembled zinc-plated screws. 100 dowels Ø12/80x125 zinc-plated +100 pre-mounted zinc-plated screws. |
| Outside body diameter |
12 mm |
| Internal diameter |
M8 |
| Generic code | Tfix maxi
Maximum thickness of the element to be fixed
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 218430METAL ISO PIEUVRE CC 12/105 Tfix 40/60 | 60 | 105 | 55 | 45 | |
| 218432METAL ISO PIEUVRE CC 12/125 Tfix 60/80 | 80 | 125 | 55 | 45 | |
| 218434METAL ISO PIEUVRE CC 12/145 Tfix 80/100 | 100 | 145 | 55 | 45 | |
| 218436METAL ISO PIEUVRE CC 12/170 Tfix 100/125 | 125 | 170 | 55 | 45 | |
| 218438METAL ISO PIEUVRE CC 12/195 Tfix 125/150 | 150 | 195 | 55 | 45 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the standard NF EN 13-501-1: Fire classification of products and building elements - Part 1: Classification from reaction to fire test data.
