MARCOVIS FM-X5 CL +Vis TH/Zn
- Through dowel with wide collar /polyamide + pre-mounted hexagon head screw torx /zinc plated, for solid and hollow materials.
Applications
- Intended use: Cracked and non-cracked concrete, hollow and solid materials with prior testing.
- Fixing façade insulation brackets (ISOLALU / ISOLCO / KONSOL) to load-bearing walls.
Advantages
- All-purpose anchor for solid and hollow materials.
- Mounting through.
- To fasten large thicknesses.
- Smooth screwing (low screwing torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Type of flange |
Large |
| Flange head diameter |
19 mm |
| Installation mode |
hammer laying Installation with torx screwdriving Installation with hexagonal screwdriving |
| Pattern |
Hexagonal (HEX) |
| Supporting material |
Cracked concrete cellular concrete Concrete Hollow brick Hollow concrete block Solid concrete block with prior testing Natural stone with prior testing Solid brick with prior testing |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| pattern hexagonal |
TH 13 |
| Head shape |
Hex. Head |
| Support drilling diameter |
10 mm |
| Maximum thickness of the element to be fixed |
15 30 45 65 90 |
| Minimum drilling depth |
80 |
| Minimum depth of implementation |
70 |
| Content |
50 dowels Ø10/15x85 polyamide with wide flange + 50 pre-assembled zinc-plated screws with hexagonal head 13 Torx40 recess with wide flange. 50 dowels Ø10/30x100 polyamide with wide flange + 50 pre-mounted zinc-plated screws with hexagonal head 13 Torx40 recess with wide flange. 50 dowels Ø10/45x115 polyamide with wide flange + 50 pre-assembled zinc-plated screws with hexagonal head 13 Torx40 recess with wide flange. 50 dowels Ø10/65x135 polyamide with wide flange + 50 zinc-plated screws with hexagonal head 13 Torx40 socket with wide flange pre-mounted. 50 dowels Ø10/90x160 polyamide with wide flange + 50 pre-assembled zinc-plated screws with hexagonal head 13 Torx40 recess with wide flange. |
| Load recovery |
138 Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
120 |
| Outside body diameter |
10 mm |
| Diameter on thread |
7 mm |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 360700MARCOVIS FM-X5 CL TH13 Zn 10/15x85 (50) | 10 | 85 | 80 | 70 | |
| 360702MARCOVIS FM-X5 CL TH13 Zn 10/30x100 (50) | 10 | 100 | 80 | 70 | |
| 360704MARCOVIS FM-X5 CL TH13 Zn 10/45x115 (50) | 10 | 115 | 80 | 70 | |
| 360706MARCOVIS FM-X5 CL TH13 Zn 10/65x135 (50) | 10 | 135 | 80 | 70 | |
| 360708MARCOVIS FM-X5 CL TH13 Zn 10/90X160 (50) | 10 | 160 | 80 | 70 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0425 anchors MARCOVIS FMX5
Find our technical sheets and declarations of performance in the generic code product page.
