MARCOVIS FM-X5 CL TH13 Zn 10/45x115 (50)
Generic code 360704
- Polyamide through anchor 10/45x115 for solid and hollow materials, with zinc-plated hex head 13 screw and pre-mounted wide flange.
Applications
- Intended use: Cracked and non-cracked concrete, hollow and solid materials with prior testing.
- Fixing façade insulation brackets (ISOLALU / ISOLCO / KONSOL) to load-bearing walls.
Advantages
- All-purpose anchor for solid and hollow materials.
- Mounting through.
- To fasten large thicknesses.
- Smooth screwing (low screwing torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Type of flange |
Large |
| Flange head diameter |
19
mm |
| Installation mode |
Installation with torx screwdriving Installation with hexagonal screwdriving Hammer laying |
| Pattern |
Hexagonal (HEX) |
| Supporting material |
Cracked concrete Cellular concrete Concrete Solid concrete block with prior testing Hollow brick Natural stone with prior testing Solid brick with prior testing Hollow concrete block |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| pattern hexagonal |
TH 13 |
| Head shape |
Hex. Head |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
45 |
| Length |
115
mm |
| Minimum drilling depth |
80 |
| Minimum depth of implementation |
70 |
| Accessory's length |
120
mm |
| Content |
50 dowels Ø10/45x115 polyamide with wide flange + 50 pre-assembled zinc-plated screws with hexagonal head 13 Torx40 recess with wide flange. |
| Load recovery |
138
Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
120 |
| Outside body diameter |
10
mm |
| Diameter on thread |
7
mm |
Sold by box of 50 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Installation temperature ≥ -20°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0425 anchors MARCOVIS FMX5
