DRILLNOX STAR PI TB/ A2+Rd
- Bi-metal A2 stainless-steel self-drilling screw, Ø5. 5, steel pilot tip, star pattern natural domed head mounted with stainless-steel-EPDM washer, for steel substrate.
Interested in this product ? Contact us
Applications
- Fastening of pre-drilled flat panels in compliance with most of the technical assessments delivered to manufacturers on aluminium profiles, thickness 2. 5 mm or steel rails, thickness ≤ 3 mm.
Advantages
- PI > Pilot tip: Specially designed for fastening several thin sheets and drilling all of the plates before screwing the thread into the support. .
- Slightly domed head and stainless steel self-tapping body, drill tip and introduction thread made from zinc-plated hardened steel.
Technical characteristics
| Type of the screw tip |
Pilote point (PI) |
| Type of thread |
Single thread |
| Drilling capacity mini |
1.5 |
| Pre-drilling |
Without pre-drilling |
| Product material |
Bi-metal (A2 stainless steel / Steel) |
| Drilling capacity maxi |
3.5 |
| Head shape |
Domed cylindrical head |
| Pattern |
Star |
| Pattern Star |
Star 25 |
| Material of the screw head |
A2 Stainless steel |
| Laquering |
Natural head & washer |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
A2 Stainless steel / EPDM |
| Outside diameter of the washer |
10 mm |
| Resistance to corrosion |
30 Kesternich cycles |
| Installation mode |
Installation by Star Gripp screwdriving |
| Supporting material |
Steel Assembly of sheet metal Aluminum |
| Diameter on thread |
5,5 mm |
| Minimum clamping capacity |
0 mm |
5 features on 20
3 generic codes
Filter:
| Generic code | CP mini
Drilling capacity mini
|
CP maxi
Drilling capacity maxi
|
L
(mm)
Length
|
CS mini
(mm)
Minimum clamping capacity
|
CA maxi
(mm)
Maximum assembly capacity
|
|
| 372531DRILLNOX STAR 3.5PI TB 5.5x28I10 | 1.5 | 3.5 | 28 | 0 | 5 | |
| 372538DRILLNOX STAR 3.5PI TB 5.5x38I10 | 1.5 | 3.5 | 38 | 0 | 10 | |
| 373581DRILLNOX STAR 3.5PI TB 5.5x34I10 | 1.5 | 3.5 | 34 | 0 | 12 |
generic codes on
lacquering
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Interested in this product ?
Contact us