VIS A METAUX FT TC DST/ A2
- Metal screw A2 stainless steel DIN 912 with teeth under Hex bit 6 cylindrical head, fully threaded.
Applications
- Used with M8 threaded female anchor.
Technical characteristics
| Diameter on thread |
8 mm |
| Thread pitch |
1,25 mm 1.25 mm |
| Head height |
7,64 mm 7.64 mm |
| Diameter of the head |
12,5 mm 12.5 mm |
| Type of baseplate |
Threaded M8 pitch 125 |
| Resistance to corrosion |
1000 Hours salt fog 30 Kesternich cycles |
| Generic code | L
(mm)
Length
|
M
Product material
|
Df
(mm)
Diameter on thread
|
TEmb
Type of baseplate
|
|
| 606602VIS METAUX FT TC DST InA2 M8x16 | 16 | A2 Stainless steel | 8 | Threaded M8 pitch 125 | |
| 606604VIS METAUX FT TC DST InA2 M8x20 | 20 | A2 Stainless steel | 8 | Threaded M8 pitch 125 | |
| 606606VIS METAUX FT TC DST InA2 M8x25 | 25 | A2 Stainless steel | 8 | Threaded M8 pitch 125 | |
| 606610VIS METAUX FT TC DST InA2 M8x30 | 30 | A2 Stainless steel | 8 | Threaded M8 pitch 125 | |
| 606612VIS METAUX FT TC DST InA2 M8x35 | 35 | A2 Stainless steel | 8 | Threaded M8 pitch 125 | |
| 606618VIS METAUX FT TC DST InA2 M8x50 | 50 | A2 Stainless steel | 8 | Threaded M8 pitch 125 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In compliance with CSTB 3194 specifications: Metal frame and thermal insulation of cladding with AT.
- In accordance with DTU 45. 4: External thermal insulation systems in cladding with ventilated air gap.
