TSA-S M10/47x100
Generic code 359341
- Zinc-plated multi-substrate anchor M10/47x100, with hex head 17 zinc-plated screw and pre-mounted washer Ø30.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
Advantages
- Multi-material anchor.
Technical characteristics
| Type of load |
Medium load |
| Load recovery |
240
Kg |
| Installation mode |
wrench tightened hammer laying |
| Length |
100
mm |
| Support drilling diameter |
12
mm |
| Supporting material |
Hollow concrete block Solid brick Natural stone with prior testing Solid concrete block Hollow brick with prior testing Concrete |
| Minimum drilling depth |
80 |
| Product material |
Zinc-plated steel class 5-8 |
| Minimum depth of implementation |
50 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
140 |
| Effective anchoring depth |
36 |
| Maximum thickness of the element to be fixed |
47 |
| Hex. Head |
17
mm |
| Diameter of the passage hole |
13
mm |
| Required tightening torque |
30
Nm |
| Content |
25 zinc-plated dowels M10/47x100 +25 zinc-plated hexagon head screws 17 +25 zinc-plated washers Ø30 pre-mounted. |
| Outside body diameter |
12
mm |
| Outside diameter of the washer |
30
mm |
| Internal diameter |
M10 |
| Diameter on thread |
10
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover