TIGE FILETEE SB M20x320 Zn
Generic code 342024
- Performance zinc-plated threaded rod M20x320, single bevel with unmounted washer and H30 nut, for chemical seal.
Applications
- Chemical seal.
Technical characteristics
Nominal diameter |
20
mm |
Installation mode |
wrench tightened |
Support drilling diameter |
22
mm |
Length |
320
mm |
Supporting material |
Solid concrete block cellular concrete Natural stone Cracked concrete Solid brick Concrete |
Product material |
Zinc-plated steel class 8-8 |
Maximum thickness of the element to be fixed |
118 |
Minimum drilling depth |
160 |
Minimum thickness of base material |
200 |
Maximum thickness of base material |
280
mm |
Hex. Head |
30
mm |
Required tightening torque |
150
Nm |
Diameter of the passage hole |
22
mm |
Rod finish |
Single bevel |
Diameter on thread |
20
mm |
Content |
10 threaded rods M20x320 zinc-plated +10 washers zinc-plated +10 nuts H30 zinc-plated not mounted. |
Drive |
30
mm |
Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- 2 possible versions per rod diameter: with 1 indentation mark (8Ø) / with 2 indentation marks (8Ø and 12Ø).
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover