TIGE FILETEE M6x70 ZBJ
Generic code 344820
- Straight cut zinc plated steel threaded rod M6x70 with unmounted washer and H10 nut, for chemical seal.
Applications
- Intended use: Concrete and solid or hollow materials with prior testing - Applications for heavy loads.
- Fixing façade insulation brackets (ISOLALU / ISOLCO / KONSOL) to load-bearing walls.
Technical characteristics
| Compatible with |
Ø12x50 sleeve. |
| Internal diameter |
M6 |
| Nominal diameter |
6
mm |
| Installation mode |
wrench tightened |
| Support drilling diameter |
8
mm |
| Length |
70
mm |
| Supporting material |
Concrete Natural stone with prior testing Solid concrete block Solid brick |
| Product material |
Zinc-plated steel class 5-8 |
| Maximum thickness of the element to be fixed |
10 |
| Minimum drilling depth |
48 |
| Minimum thickness of base material |
100 |
| Hex. Head |
10
mm |
| Required tightening torque |
5
Nm |
| Diameter of the passage hole |
8
mm |
| Rod finish |
Straight cut |
| Diameter on thread |
6
mm |
| Content |
50 threaded rods M6x70 zinc plated +50 washers zinc plated +50 nuts H10 zinc plated not mounted. |
| Drive |
10
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover
-
POMPE SOUFFLANTESee the generic code
-
CHIMFORT KEM-H - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-P - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-E - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-V - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-VEA - CARTOUCHESee the 2 generic codes
-
Foret béton SDS+ 2TSee the 92 generic codes
-
GOUPILLONSee the generic code