TIGE FILETEE M10x160 Zn

Generic code 344827

Straight cut zinc-plated threaded rod M10x160 with unmounted washer and H17 nut, for chemical seal.

See the article code

See related and complementary products

Interested in this product ? Contact us

Applications

Intended use: Concrete and solid or hollow materials with prior testing - Applications for heavy loads.
Fixing façade insulation brackets (ISOLALU / ISOLCO / KONSOL) to load-bearing walls.

Technical characteristics

Compatible with	Ø15x130 sleeve.
Internal diameter	M10
Nominal diameter	10 mm
Installation mode	wrench tightened
Support drilling diameter	12 mm
Length	160 mm
Supporting material	Concrete Solid brick Natural stone with prior testing Solid concrete block
Product material	Zinc-plated steel class 5-8
Maximum thickness of the element to be fixed	61
Minimum drilling depth	80
Effective anchoring depth	135
Minimum thickness of base material	110
Maximum thickness of base material	150 mm
Hex. Head	17 mm
Required tightening torque	20 Nm
Diameter of the passage hole	12 mm
Rod finish	Straight cut
Diameter on thread	10 mm
Content	25 threaded rods M10x160 zinc plated +25 washers zinc plated +25 nuts H17 zinc plated not mounted.
Drive	17 mm

5 features on 20

See all the offer TIGE FILETEE M10x160 Zn

Designation	Article codes	Color label
TIGE FILETEE M10x160 Zn	344827000

Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.

Pull Out test

ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.

Discover

Integrated engineering office

We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).

Discover

Software Specif Chevilles

Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.

Discover

Cartier Paris store

The Etanco group's solution was to supply a whole set of mechanically welded stainless steel parts with articulated arms thus enabling the stone to tilt into a lintel. Our BARACO range of anchors as well as our ISOLCO range of brackets have been chosen and supplied for their high resistance to corrosion, which is essential in a large city subject to pollution.

Find out more on the ETANCO Group website