TIGE FILETEE DROITE A4 M10x110
Generic code 340112
- Straight cut A4 stainless steel threaded rod M10x110 with unmounted washer and H17 nut, for chemical seal.
Applications
- Intended use: Concrete and solid or hollow materials with prior testing - Applications for heavy loads.
- Fixing the legs (SRM / VRM stapled stones) on the load-bearing wall.
Advantages
- Hexagonal recess for easy screwing into the chemical seal.
Technical characteristics
| Nominal diameter |
10
mm |
| Length |
110
mm |
| Support drilling diameter |
12
mm |
| Diameter on thread |
10
mm |
| Maximum thickness of the element to be fixed |
11 |
| Minimum drilling depth |
80 |
| Drive |
17
mm |
| Internal diameter |
M10 |
| Installation mode |
Wrench tightened |
| Supporting material |
Solid concrete block Natural stone with prior testing Solid brick Concrete |
| Product material |
A4 Stainless steel |
| Effective anchoring depth |
90 |
| Minimum thickness of base material |
110 |
| Hex. Head |
17
mm |
| Required tightening torque |
20
Nm |
| Diameter of the passage hole |
12
mm |
| Rod finish |
Straight cut |
| Content |
10 threaded rods M10x110 stainless steel A4 +10 washers stainless steel A4 +10 nuts H17 stainless steel A4 not mounted. |
Sold by bag of 10 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Used in conjunction with the sieve.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover
-
CHIMFORT KEM-H - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-P - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-V - CARTOUCHESee the generic code
-
CHIMFORT KEM-VEA - CARTOUCHESee the generic code
-
Foret béton SDS+ 2TSee the 66 generic codes -
Foret béton SDS+ 4TSee the 42 generic codes -
GOUPILLONSee the generic code
-
POMPE SOUFFLANTESee the generic code