TAPCOL F7 6x40
Generic code 359250
- Polyamide drive anchor with nail 6x40 with countersunk collar, with zinc-plated M7 nail with threaded head pitch 100 pre-assembled for collars.
Applications
- Intended use: Solid materials, cracked and non-cracked concrete - Hollow materials with prior testing - High-risk applications.
Advantages
- Quick installation for serial fixing.
- Mounting across.
- Can be removed using Pozidriv screwdriver.
- Delivered complete: assembled anchor + nail.
Technical characteristics
| With flange |
True |
| Flange head diameter |
8.5
mm |
| Installation mode |
Hammer laying |
| Pattern |
Pozidriv(Pz) |
| Supporting material |
Cellular concrete with prior testing Natural stone with prior testing Solid brick Hollow brick with prior testing Solid concrete block Cracked concrete Hollow concrete block with prior testing |
| Product material |
PA6 polyamide + Zinc-plated steel |
| pattern Pozidriv |
Pozidriv (Pz) 2 |
| Pre-assembled product |
True |
| Head shape |
Threaded head |
| Support drilling diameter |
6
mm |
| Length |
40
mm |
| Minimum drilling depth |
50 |
| Minimum depth of implementation |
40 |
| Nominal diameter |
3.8
mm |
| Accessory's length |
45
mm |
| Content |
50 polyamide dowels-nails Ø6x40 with countersunk collar + 50 preassembled zinc-plated nails with threaded head M7, 100 pcs. For clamps. |
| Load recovery |
69
Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
60 |
| Outside body diameter |
6
mm |
| Diameter on thread |
3.8
mm |
Sold by box of 200 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Installation temperature ≥ 5°C. Used for collar with threaded base Ø7 pitch 150.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE ETA 10 0190 anchors TAPCO TAP-LARGE
