SUPER ISOMUR T60/PA +Tige/InA2
- Ø60 wide head polyamide knock-in dowel + unmounted stainless steel A2 hollow wall rod, for rigid insulation.
Applications
- Intended use: All hollow and solid materials with prior testing.
- System for facade masonry lining.
Advantages
- Black plastic drive anchor with crimped stainless steel rod, hammered in.
- Each box contains x dowels + rods + 1 installation tube.
- 60 mm wide head.
- Used with 140 mm installation tube (to shorten on-site).
Technical characteristics
| Load recovery |
25 Kg |
| With flange |
True |
| Installation mode |
Hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60 mm |
| Supporting material |
Concrete Hollow brick Hollow concrete block with prior testing Solid concrete block with prior testing Natural stone with prior testing Solid brick with prior testing |
| Product material |
PA6 polyamide + Stainless steel A2 |
| Support drilling diameter |
8,5 mm |
| Maximum thickness of the element to be fixed |
100 120 140 160 180 220 270 80 |
| Minimum drilling depth |
80 |
| Minimum depth of implementation |
40 |
| Content |
125 dowels Ø8/220x260 polyamide +125 unassembled A2 stainless steel rods +1 installation tool. 125 dowels Ø8/270x310 polyamide +125 unassembled A2 stainless steel rods +1 installation tool. 250 dowels Ø8/100x140 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. 250 dowels Ø8/120x160 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. 250 dowels Ø8/140x180 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. 250 dowels Ø8/160x200 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. 250 dowels Ø8/180x225 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. 250 dowels Ø8/80x120 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. |
| Outside body diameter |
8 mm |
| Minimum thickness of base material |
100 |
| Generic code | Tfix maxi
Maximum thickness of the element to be fixed
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 358312SUPER ISOMUR 8/80x120 | 80 | 120 | 80 | 40 | |
| 358314SUPER ISOMUR 8/100x140 | 100 | 140 | 80 | 40 | |
| 358316SUPER ISOMUR 8/120x160 | 120 | 160 | 80 | 40 | |
| 358318SUPER ISOMUR 8/140x180 | 140 | 180 | 80 | 40 | |
| 358320SUPER ISOMUR 8/160x200 | 160 | 200 | 80 | 40 | |
| 358322SUPER ISOMUR 8/180x225 | 180 | 225 | 80 | 40 | |
| 358326SUPER ISOMUR 8/220x260 | 220 | 260 | 80 | 40 | |
| 358331SUPER ISOMUR 8/270x310 | 270 | 310 | 80 | 40 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover