SUPER ISOMUR 8/80x120
Generic code 358312
- Polyamide drive anchor with nail 8/80x120 with wide head Ø60, with unmounted A2 stainless steel hollow wall rod for rigid insulation.
Applications
- Intended use: All hollow and solid materials with prior testing.
- System for facade masonry lining.
Advantages
- Black plastic drive anchor with crimped stainless steel rod, hammered in.
- Each box contains x dowels + rods + 1 installation tube.
- 60 mm wide head.
- Used with 140 mm installation tube (to shorten on-site).
Technical characteristics
| Load recovery |
25
Kg |
| With flange |
True |
| Installation mode |
hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60
mm |
| Supporting material |
Hollow brick Solid concrete block with prior testing Solid brick with prior testing Hollow concrete block with prior testing Concrete Natural stone with prior testing |
| Product material |
PA6 polyamide + Stainless steel A2 |
| Support drilling diameter |
8.5
mm |
| Maximum thickness of the element to be fixed |
80 |
| Length |
120
mm |
| Minimum drilling depth |
80 |
| Minimum depth of implementation |
40 |
| Content |
250 dowels Ø8/80x120 polyamide +250 unassembled A2 stainless steel rods +1 installation tool. |
| Outside body diameter |
8
mm |
| Minimum thickness of base material |
100 |
| Accessory's length |
220
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- The hollow wall rod is positioned approx. 50 mm into the external brick wall (wavy part). Not resistant to UV Anchoring depth to be defined according to the quality of the support material: Drilling Ø8.5 mm > Solid / Drilling Ø8 mm > Hollow.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover