SUPER ISO II LONG 10/180x260
Generic code 358617
- Polypropylene drive anchor 10/180x260 with wide head Ø60, with premounted black polyamide nail for rigid insulation.
Interested in this product ? Contact us
Advantages
- Sinking with a hammer.
- 60 mm wide head.
- Plastic expansion nail Ø 5 mm.
- To be used with additional Ø140 mm washer for flexible insulation.
- Heat loss coefficient = 0.0012 W/K.
Technical characteristics
| Load recovery |
18
Kg |
| With flange |
True |
| Installation mode |
hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60
mm |
| Supporting material |
Hollow concrete block with prior testing Natural stone with prior testing cellular concrete Concrete Solid concrete block Solid brick Hollow brick with prior testing |
| Product material |
Polypropylene + PA6 polyamide |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
180 |
| Length |
260
mm |
| Minimum drilling depth |
85 |
| Minimum depth of implementation |
80 |
| Content |
200 dowels Ø10/180x260 polypropylene +200 unassembled polyamide nails. |
| Outside body diameter |
10
mm |
| Minimum thickness of base material |
110 |
5 features on 15
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- 5 anchors / m² running surface; refer to the insulation manufacturer’s technical data sheet. Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.
- In accordance with the ETA 11 0280 anchors SUPER ISO II
Interested in this product ?
Contact us