SUPER ISO II 10/75x120 (Box 200)
Generic code 358564
- Polypropylene drive anchor 10/75x120 with wide head Ø60, with premounted black polyamide nail for rigid insulation.
Applications
- Intended use: All hollow and solid materials with prior testing.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Hammered in.
- 60 mm wide head.
- Expansion nail Ø 5 mm.
- To be used with additional Ø140 mm washer for flexible insulation.
- Heat loss coefficient = 0. 0020 W/K.
Technical characteristics
| Load recovery |
12
Kg |
| With flange |
True |
| Installation mode |
Hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60
mm |
| Supporting material |
Hollow concrete block with prior testing Natural stone with prior testing Solid brick Cellular concrete Solid concrete block Hollow brick with prior testing Concrete |
| Product material |
Polypropylene + PA6 polyamide |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
75 |
| Length |
120
mm |
| Minimum drilling depth |
50 |
| Minimum depth of implementation |
45 |
| Content |
200 dowels Ø10/75x120 polypropylene +200 unmounted polyamide nails. |
| Outside body diameter |
10
mm |
| Minimum thickness of base material |
100 |
Sold by case of 200 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- 5 anchors / m² running surface; refer to the insulation manufacturer’s technical data sheet. Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the Homologation European Technical Assessment : SUPER ISO II MT & LONG insulating plug.
-
Homologation European Technical Assessment : SUPER ISO II MT & LONG insulating plug.HomologationsThis document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF SUPER-ISO IIDrawings 2D
This document is reserved for our connected customers,
log in or create an account to download it.
