Product Image
  • Zoom Images

SUPER ISO II 10/45x90 (BTE 300)

Generic code   358560

  • Polypropylene drive anchor 10/45x90 with wide head Ø60, with premounted black polyamide nail for rigid insulation.
See the article code
Interested in this product ? Contact us

Applications

  • Intended use: All hollow and solid materials with prior testing.
  • Fixing rigid or flexible insulation to the façade.

Advantages

  • Sinking with a hammer.
  • 60 mm wide head.
  • Plastic expansion nail Ø 5 mm.
  • To be used with additional Ø140 mm washer for flexible insulation.
  • Heat loss coefficient = 0.0012 W/K.

Technical characteristics

Load recovery 12  Kg
With flange True
Installation mode hammer laying
Type of flange Large
Flange head diameter 60  mm
Supporting material Solid concrete block
Solid brick
Natural stone with prior testing
Hollow brick with prior testing
Concrete
cellular concrete
Hollow concrete block with prior testing
Product material Polypropylene + PA6 polyamide
Support drilling diameter 10  mm
Maximum thickness of the element to be fixed 45
Length 90  mm
Minimum drilling depth 50
Minimum depth of implementation 45
Content 300 dowels Ø10/45x90 polypropylene +300 unmounted polyamide nails.
Outside body diameter 10  mm
Minimum thickness of base material 100
5 features on 15
See all the offer SUPER ISO II 10/45x90 (BTE 300)

Article codes

Designation Article codes Color label
SUPER ISO II 10/45x90 (box 300) 358560000

Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.


Recommendation advice

  • 5 anchors / m² running surface; refer to the insulation manufacturer’s technical data sheet. Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.

Product-related services

Pull Out test

ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.

Discover

Integrated engineering office

We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).

Discover

Software Specif Chevilles

Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.

Discover

Regulations and approvals

  • In accordance with the ETA 11 0280 anchors SUPER ISO II

Documentations to download

Reference sites

Cartier Paris store

The Etanco group's solution was to supply a whole set of mechanically welded stainless steel parts with articulated arms thus enabling the stone to tilt into a lintel. Our BARACO range of anchors as well as our ISOLCO range of brackets have been chosen and supplied for their high resistance to corrosion, which is essential in a large city subject to pollution.

Find out more on the ETANCO Group website

Associated products

Interested in this product ?
Contact us