SUPER ISO II 10/125x170Mt (BTE 200)
Generic code 358569
- Polypropylene drive anchor 10/125x170 with wide head Ø60, with pre-mounted zinc-plated nail for rigid insulation.
Applications
- Intended use: All hollow and solid materials with prior testing.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Hammered in.
- 60 mm wide head.
- Expansion nail Ø 5 mm.
- To be used with additional Ø140 mm washer for flexible insulation.
- Heat loss coefficient = 0.0020 W/K.
Technical characteristics
| Load recovery |
14
Kg |
| With flange |
True |
| Installation mode |
hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60
mm |
| Supporting material |
Solid concrete block with prior testing Hollow brick Solid brick with prior testing Hollow concrete block cellular concrete Natural stone with prior testing |
| Product material |
Polypropylene + Zinc-plated steel |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
125 |
| Length |
170
mm |
| Minimum drilling depth |
50 |
| Minimum depth of implementation |
45 |
| Content |
200 dowels Ø10/125x170 polypropylene +200 unmounted zinc-plated nails. |
| Outside body diameter |
10
mm |
| Minimum thickness of base material |
100 |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- 5 anchors / m² running surface; refer to the insulation manufacturer’s technical data sheet. Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 11 0280 anchors SUPER ISO II
