PFL-S FM 744 M6/10x40
Generic code 344490
- Zinc-plated safety anchor M6/10x40, with hex head 10 zinc-plated metal screw and pre-mounted washer.
Applications
- Intended use: non-cracked concrete - Applications for heavy loads.
Advantages
- Self-expanding female safety anchor.
- High loads.
- Low installation depth.
- Low edge and centre distances.
- Delivered complete: dowel + screw + washer mounted.
Technical characteristics
| Type of load |
Heavy load |
| Load recovery |
2560
Kg |
| Installation mode |
Hammer laying Wrench tightened |
| Length |
40
mm |
| Support drilling diameter |
10
mm |
| Supporting material |
Concrete |
| Minimum drilling depth |
55 |
| Product material |
Zinc plated steel |
| Minimum depth of implementation |
40 |
| Pre-assembled product |
True |
| Minimum thickness of base material |
100 |
| Effective anchoring depth |
33,5 |
| Maximum thickness of the element to be fixed |
10 |
| Diameter of the passage hole |
12
mm |
| Required tightening torque |
6
Nm |
| Content |
50 dowels M6/10x40 zinc-plated +50 zinc-plated hexagon head screws 10 +50 preassembled zinc-plated washers. |
| Outside body diameter |
10
mm |
| Internal diameter |
M6 |
| Diameter on thread |
6
mm |
Sold by box of 50 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 05 0169 anchors PFL FM 744
