PFL FM 744 M10x60
Generic code 344475
- Zinc-plated bare safety anchor M10x60 with screw-in expansion.
Applications
- Intended use: Non-cracked concrete - Applications for heavy loads.
- Scaffolding anchor, for use with RAVALCO/M.
Advantages
- Self-expanding female safety anchor.
- High loads.
- Low installation depth.
- Low edge and centre distances.
Technical characteristics
| Type of load |
Heavy load |
| Load recovery |
2560
Kg |
| Installation mode |
hammer laying |
| Length |
60
mm |
| Support drilling diameter |
16
mm |
| Supporting material |
Concrete |
| Minimum drilling depth |
75 |
| Product material |
Zinc plated steel |
| Minimum depth of implementation |
60 |
| Minimum thickness of base material |
100 |
| Effective anchoring depth |
50 |
| Diameter of the passage hole |
18
mm |
| Required tightening torque |
30
Nm |
| Content |
25 dowels M10x60 zinc-plated, alone. |
| Outside body diameter |
16
mm |
| Internal diameter |
M10 |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Recommended screw length: anchor length [L] + thickness to be tightened [tfix] + 10 mm.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 05 0169 anchors PFL FM 744
-
DoP Cheville PFLDOPDownload -
Approval European Technical Evaluation: PFL FM-744 /Zn anchor - French version.Homologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF PFL FM744 M10x60Technical drawings
This document is reserved for our connected customers,
log in or create an account to download it.
