NAILFIX TB /GàC
- Bare / hot-dip galvanised friction nail with domed head, for concrete.
Applications
- Intended use: Concrete - Applications excluding heavy loads.
Advantages
- Concrete nail to be hammered in.
- Quick to install.
- Non-removable fixing.
- High resistance to corrosion.
Technical characteristics
| Flange head diameter |
10 mm |
| Installation mode |
Hammer laying |
| Supporting material |
Concrete |
| Product material |
Galvanized steel |
| Head shape |
Rounded head |
| Support drilling diameter |
5 mm |
| Maximum thickness of the element to be fixed |
110 140 15 160 25 35 45 5 60 80 |
| Minimum drilling depth |
50 |
| Content |
100 hot-dip galvanised concrete nails Ø4. 5x100 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x120 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x150 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x180 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x200 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x45 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x55 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x75 with domed head Ø10. 100 hot-dip galvanised concrete nails Ø4. 5x85 with domed head Ø10. 100 Ø4. 5x65 hot-dip galvanised concrete nails with domed head Ø10. |
| Load recovery |
166 Kg |
| Type of load |
Light load |
| Outside body diameter |
4 mm |
| Effective anchoring depth |
40 |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
|
| 359600NAILFIX TB/CH 4.5x45 | 5 | 45 | 50 | |
| 359604NAILFIX TB/CH 4.5x65 | 5 | 65 | 50 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- Benefit from a test report VERITAS dme 79341901 anchors NAILFIX Except articles codes (359616, 359612, 359614 )
