NAILFIX TB/CH 4.5x180
Generic code 359616
- Hot galvanised steel bare friction nail 4.5x180 with domed head, for concrete.
Technical characteristics
| Flange head diameter |
10
mm |
| Installation mode |
Hammer laying |
| Supporting material |
Concrete |
| Product material |
Galvanized steel |
| Head shape |
Rounded head |
| Support drilling diameter |
5
mm |
| Maximum thickness of the element to be fixed |
140 |
| Length |
180
mm |
| Minimum drilling depth |
50 |
| Content |
100 hot-dip galvanised concrete nails Ø4. 5x180 with domed head Ø10. |
| Load recovery |
166
Kg |
| Type of load |
Light load |
| Outside body diameter |
4
mm |
| Effective anchoring depth |
40 |
Sold by bag of 100 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 08 0239 coupling fixings sealing
- In accordance with DTU 43. 1: Waterproofing work on flat roofs on masonry.
