MAX ISO FM-ISOMAX /PP +Clou/Zn
- White polypropylene dowel with wide head Ø60 + zinc-plated nail with pre-moulded head /polypropylene, for rigid insulation.
Applications
- Distribution washer for fastening flexible insulation on the façade with MAX ISO anchor.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Sinking with a hammer.
- 60 mm wide head.
- Ø 5 mm metal expansion nail.
- Can be used with additional Ø100 mm washer for soft insulation.
- Heat loss coefficient = 0.0020 W/K.
Technical characteristics
Load recovery |
25 Kg |
Installation mode |
hammer laying |
Type of flange |
Large |
Flange head diameter |
60 mm |
Supporting material |
cellular concrete Concrete Hollow brick Solid brick Natural stone Hollow concrete block Solid concrete block |
Product material |
Polypropylene + Zinc-plated steel |
Support drilling diameter |
8 mm |
Outside body diameter |
8 mm |
Generic code | Tfix maxi
Maximum thickness of the element to be fixed
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
358500MAX-ISO FM-ISOMAX PE 8/45x100 (200p) | 50 | 100 | 70 | 55 | |
358502MAX-ISO FM-ISOMAX PE 8/65x120 (200p) | 70 | 120 | 70 | 55 | |
358504MAX-ISO FM-ISOMAX PE 8/85x140 (200p) | 90 | 140 | 70 | 55 | |
358506MAX-ISO FM-ISOMAX PE 8/105x160 (200p) | 110 | 160 | 70 | 55 | |
358508MAX-ISO FM-ISOMAX PE 8/125x180 (200p) | 130 | 180 | 70 | 55 | |
358510MAX-ISO FM-ISOMAX PE 8/145x200 (200p) | 150 | 200 | 70 | 55 | |
358512MAX-ISO FM-ISOMAX PE 8/165x220 (200p) | 170 | 220 | 70 | 55 | |
358514MAX-ISO FM-ISOMAX PE 8/205x260 (200p) | 210 | 260 | 70 | 55 | |
358516MAX-ISO FM-ISOMAX PE 8/245x300 (200p) | 250 | 300 | 70 | 55 | |
358518MAX-ISO FM-ISOMAX PE 8/305x360 | 310 | 360 | 70 | 55 | |
358520MAX-ISO FM-ISOMAX PE 8/345x400 (100p) | 350 | 400 | 70 | 55 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 23 0687 MAX ISO
Find our technical sheets and declarations of performance in the generic code product page.