MAX-ISO FM-ISOMAX PE 8/305x360
Generic code 358518
- White polypropylene drive anchor with nail 8/305x360 with wide head Ø60, pre-mounted zinc-plated nail with polypropylene head for rigid insulation.
Applications
- Distribution washer for fastening flexible insulation on the façade with MAX ISO anchor.
- Fixing rigid or flexible insulation to the façade.
Advantages
- Sinking with a hammer.
- 60 mm wide head.
- Ø 5 mm metal expansion nail.
- Can be used with additional Ø100 mm washer for soft insulation.
- Heat loss coefficient = 0. 0020 W/K.
Technical characteristics
| Load recovery |
25
Kg |
| With flange |
True |
| Installation mode |
Hammer laying |
| Type of flange |
Large |
| Flange head diameter |
60
mm |
| Supporting material |
Hollow concrete block Solid brick Cellular concrete Solid concrete block Concrete Natural stone Hollow brick |
| Product material |
Polypropylene + Zinc-plated steel |
| Support drilling diameter |
8
mm |
| Maximum thickness of the element to be fixed |
310 |
| Length |
360
mm |
| Minimum drilling depth |
70 |
| Minimum depth of implementation |
55 |
| Content |
200 dowels Ø8/305x360 polypropylene +200 unmounted zinc-plated polypropylene head nails. |
| Outside body diameter |
8
mm |
| Minimum thickness of base material |
100 |
Sold by case of 100 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 23 0687 MAX ISO
