Product Image
  • Zoom Images

MAX-ISO FM-ISOMAX PE 8/105x160 (200p)

Generic code   358506

  • White polypropylene drive anchor with nail 8/105x160 with wide head Ø60, pre-mounted zinc-plated nail with polypropylene head for rigid insulation.
See the article code
Interested in this product ? Contact us

Applications

  • Distribution washer for fastening flexible insulation on the façade with MAX ISO anchor.
  • Fixing rigid or flexible insulation to the façade.

Advantages

  • Sinking with a hammer.
  • 60 mm wide head.
  • Ø 5 mm metal expansion nail.
  • Can be used with additional Ø100 mm washer for soft insulation.
  • Heat loss coefficient = 0.0020 W/K.

Technical characteristics

Load recovery 25  Kg
With flange True
Installation mode hammer laying
Type of flange Large
Flange head diameter 60  mm
Supporting material Solid brick
Concrete
Hollow concrete block
Hollow brick
Solid concrete block
Natural stone
cellular concrete
Product material Polypropylene + Zinc-plated steel
Support drilling diameter 8  mm
Maximum thickness of the element to be fixed 110
Length 160  mm
Minimum drilling depth 70
Minimum depth of implementation 55
Content 200 dowels Ø8/105x160 polypropylene + 200 unassembled zinc-plated nails with polypropylene head.
Outside body diameter 8  mm
Minimum thickness of base material 100
5 features on 15
See all the offer MAX-ISO FM-ISOMAX PE 8/105x160 (200p)

Article codes

Designation Article codes Color label
MAX-ISO FM-ISOMAX PE 8/105x160 (200p) 358506000

Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.


Recommendation advice

  • Not resistant to ultraviolet light. Installation temperature: 0°C to +40°C. Temperature of use: -30°C to +70°C.

Product-related services

Pull Out test

ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.

Discover

Integrated engineering office

We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).

Discover

Software Specif Chevilles

Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.

Discover

Regulations and approvals

  • In accordance with the ETA 23 0687 MAX ISO

Documentations to download

Reference sites

Cartier Paris store

The Etanco group's solution was to supply a whole set of mechanically welded stainless steel parts with articulated arms thus enabling the stone to tilt into a lintel. Our BARACO range of anchors as well as our ISOLCO range of brackets have been chosen and supplied for their high resistance to corrosion, which is essential in a large city subject to pollution.

Find out more on the ETANCO Group website

Associated products

Interested in this product ?
Contact us