MARCOVIS MP /PA +Vis TF Tx /Zn
- Through dowel /polyamide + countersunk screw torx /zinc plated, not mounted, for solid materials.
Applications
- Intended use: Cracked and non-cracked concrete, solid materials (1) with prior testing - High-risk applications.
Advantages
- To fasten large thicknesses.
- Shallow installation depth: 50 mm.
- Delivered complete: non-assembled anchor + screw.
- Cross mounting.
Technical characteristics
| With flange |
True |
| Installation mode |
Hammer laying Installation with torx screwdriving |
| Pattern |
Torx |
| Supporting material |
Cracked concrete Cellular concrete Solid brick Solid concrete block Natural stone with prior testing |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Head shape |
Coutersunked head |
| Support drilling diameter |
10 mm |
| Maximum thickness of the element to be fixed |
10 110 30 50 65 85 |
| Minimum drilling depth |
65 |
| Minimum depth of implementation |
50 |
| Content |
50 dowels Ø10/10x60 polyamide + 50 zinc-plated countersunk screws Torx40 not mounted. 50 dowels Ø10/110x160 polyamide + 50 zinc-plated countersunk screws Torx40, not mounted. 50 dowels Ø10/30x80 polyamide + 50 zinc-plated countersunk screws Torx40 not mounted. 50 dowels Ø10/50x100 polyamide + 50 zinc-plated countersunk screws Torx40 not mounted. 50 dowels Ø10/65x115 polyamide + 50 zinc-plated countersunk screws Torx40 not mounted. 50 dowels Ø10/85x135 polyamide + 50 zinc-plated countersunk screws Torx40, not mounted. |
| Load recovery |
140 Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
100 |
| Outside body diameter |
10 mm |
| Diameter on thread |
7 mm |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 358708MARCOVIS MP 10/65x115 Tx40 | 10 | 115 | 65 | 50 | |
| 358712MARCOVIS MP 10/110x160 Tx40 | 10 | 160 | 65 | 50 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover