MARCOVIS KT-10 TF/Tx40 Zn 10/190x260 mm
Generic code 360520
- Blue polyamide through anchor 10/190x260 for solid and hollow materials, with zinc-plated countersunk screw Torx40 not mounted.
Applications
- Intended use: Non-cracked concrete, solid and hollow materials with prior testing.
Advantages
- All-purpose anchor for solid and hollow materials.
- Mounting through.
- Very large thicknesses to be fixed.
- Delivered complete: pre-assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Installation mode |
Installation with torx screwdriving hammer laying |
| Pattern |
Torx |
| Supporting material |
Hollow brick Solid concrete block with prior testing Solid brick Natural stone with prior testing Concrete cellular concrete |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
190 |
| Length |
260
mm |
| Minimum drilling depth |
85 |
| Minimum depth of implementation |
70 |
| Accessory's length |
265
mm |
| Content |
50 dowels Ø10/190x260 polyamide + 50 pre-assembled zinc-plated countersunk screws Torx40. |
| Load recovery |
198
Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
100 |
| Outside body diameter |
10
mm |
| Diameter on thread |
7
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover