MARCOVIS KT-10 +Vis TF Tx /Zn
- Through dowel /blue polyamide + countersunk screw torx /zinc plated, not mounted, for solid and hollow materials.
Applications
- Intended use: Non-cracked concrete, solid and hollow materials with prior testing.
Advantages
- All-purpose anchor for solid and hollow materials.
- Mounting through.
- Very large thicknesses to be fixed.
- Delivered complete: pre-assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Installation mode |
Hammer laying Installation with torx screwdriving |
| Pattern |
Torx |
| Supporting material |
Cellular concrete Concrete Hollow brick Solid brick Solid concrete block with prior testing Natural stone with prior testing |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| Support drilling diameter |
10 mm |
| Maximum thickness of the element to be fixed |
170 190 210 230 |
| Minimum drilling depth |
85 |
| Minimum depth of implementation |
70 |
| Content |
50 dowels Ø10/170x240 polyamide + 50 pre-assembled zinc-plated countersunk screws Torx40. 50 dowels Ø10/190x260 polyamide + 50 pre-assembled zinc-plated countersunk screws Torx40. 50 dowels Ø10/210x280 polyamide + 50 zinc-plated countersunk screws Torx40 preassembled. 50 dowels Ø10/230x300 polyamide + 50 pre-assembled zinc-plated countersunk screws Torx40. |
| Load recovery |
198 Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
100 |
| Outside body diameter |
10 mm |
| Diameter on thread |
7 mm |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 360519MARCOVIS KT-10 TF/Tx40 Zn 10/170x240 mm | 10 | 240 | 85 | 70 | |
| 360520MARCOVIS KT-10 TF/Tx40 Zn 10/190x260 mm | 10 | 260 | 85 | 70 | |
| 360521MARCOVIS KT-10 TF/Tx40 Zn 10/210x280 mm | 10 | 280 | 85 | 70 | |
| 360522MARCOVIS KT-10 TF/Tx40 Zn 10/230x300 mm | 10 | 300 | 85 | 70 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover