MARCOVIS FM-X5s CL TH13 A4 10/10x60 (50)
Generic code 360620
- Polyamide through anchor 10/10x60 for solid and hollow materials, with A4 stainless steel hex head 13 screw and pre-mounted wide flange.
Applications
- Intended use: Non-cracked concrete, solid and hollow materials with prior testing.
Advantages
- All-purpose anchor for solid and hollow materials.
- Through-hole installation.
- Smooth screwing (low torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Type of flange |
Large |
| Flange head diameter |
19
mm |
| Installation mode |
Installation with torx screwdriving Installation with hexagonal screwdriving hammer laying |
| Pattern |
Hexagonal (HEX) |
| Supporting material |
cellular concrete with prior testing Solid concrete block Solid brick Natural stone with prior testing Hollow brick Hollow concrete block Concrete |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Stainless steel A4 |
| Pre-assembled product |
True |
| pattern hexagonal |
TH 13 |
| Head shape |
Hex. Head |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
10 |
| Length |
60
mm |
| Minimum drilling depth |
60 |
| Minimum depth of implementation |
50 |
| Accessory's length |
65
mm |
| Content |
50 x Ø10/10x60 polyamide dowels with wide collar + 50 pre-mounted A4 stainless steel screws with hexagonal head 13, Torx40 socket, with wide collar. |
| Load recovery |
114
Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
100 |
| Outside body diameter |
10
mm |
| Diameter on thread |
7
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover
