MARCOVIS FM-X5 TH13 Zn 10/30x100 (50)
Generic code 360602
- Polyamide through anchor 10/30x100 for solid and hollow materials, with pre-mounted zinc-plated hex head 13 screw.
Applications
- Intended use: Cracked and non-cracked concrete, hollow and solid materials with prior testing.
- Fixing façade insulation brackets (Isolalu / Isolco / Konsol) to load-bearing walls.
Advantages
- All-purpose anchor for solid and hollow materials.
- Through-hole installation.
- To fasten large thicknesses.
- Smooth screwing (low screwing torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Flange head diameter |
19
mm |
| Installation mode |
hammer laying Installation with hexagonal screwdriving Installation with torx screwdriving |
| Pattern |
Hexagonal (HEX) & Torx (TORX) |
| Supporting material |
Solid brick with prior testing Cracked concrete Solid concrete block with prior testing Concrete Hollow concrete block Hollow brick Natural stone with prior testing cellular concrete |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| pattern hexagonal |
TH 13 |
| Head shape |
Hex. Head |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
30 |
| Length |
100
mm |
| Minimum drilling depth |
80 |
| Minimum depth of implementation |
70 |
| Accessory's length |
105
mm |
| Content |
50 dowels Ø10/30x100 polyamide + 50 preassembled zinc-plated screws with hexagonal head 13, Torx40 recess, wide flange. |
| Load recovery |
138
Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
120 |
| Outside body diameter |
10
mm |
| Diameter on thread |
7
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Installation temperature ≥ -20°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0425 anchors MARCOVIS FMX5
