MARCOVIS FM-X5 TF/Tx40 Zn 10/30x100
Generic code 360508
- Polyamide through anchor 10/30x100 for solid and hollow materials, with unmounted zinc-plated screw with Torx40 countersunk head.
Applications
- Fixing of cladding and accessories on: solid materials - non-cracked concrete - hollow materials.
Advantages
- All-purpose anchor for solid and hollow materials.
- Transverse mounting.
- To fasten large thicknesses.
- Smooth screwing (low screwing torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
| With flange |
True |
| Installation mode |
hammer laying Installation with torx screwdriving |
| Pattern |
Torx |
| Supporting material |
Concrete Hollow concrete block Solid brick with prior testing Solid concrete block with prior testing Natural stone with prior testing Cracked concrete Hollow brick cellular concrete |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| Head shape |
Coutersunked head |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
30 |
| Length |
100
mm |
| Minimum drilling depth |
80 |
| Minimum depth of implementation |
70 |
| Accessory's length |
105
mm |
| Content |
50 dowels Ø10/30x100 polyamide + 50 pre-assembled zinc-plated Torx40 countersunk screws. |
| Load recovery |
138
Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
120 |
| Outside body diameter |
10
mm |
| Diameter on thread |
7
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Installation temperature ≥ -20°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0425 anchors MARCOVIS FMX5
-
DOP cheville MARCOVIS FM X5DOPDownload -
ETA approval 10-0425 MARCOVIS FM-X5 anchoHomologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF MARCOVIS FM-X5 TF 10/30x100Technical drawings
This document is reserved for our connected customers,
log in or create an account to download it.
