MARCOVIS FM-X5 CL TH13 A4 10/90X160 (50)
Generic code 360758
- Polyamide through anchor 10/90x160 for solid and hollow materials, with A4 stainless steel hex head 13 screw and pre-mounted wide flange.
Applications
- Intended use: Non-cracked concrete, solid and hollow materials with prior testing.
- Fixing façade insulation brackets (ISOLALU / ISOLCO / KONSOL) to load-bearing walls.
Advantages
- All-purpose anchor for solid and hollow materials.
- Mounting through.
- To fasten large thicknesses.
- Smooth screwing (low screwing torque).
- Extra-flexible high-quality nylon.
- Highly corrosion resistant in stainless steel version.
- Delivered complete: assembled anchor + screw.
Technical characteristics
With flange |
True |
Type of flange |
Large |
Flange head diameter |
19
mm |
Installation mode |
hammer laying Installation with torx screwdriving Installation with hexagonal screwdriving |
Pattern |
Hexagonal (HEX) |
Supporting material |
Solid brick with prior testing cellular concrete Cracked concrete Hollow brick Natural stone with prior testing Solid concrete block with prior testing Hollow concrete block Concrete |
Pattern Torx |
TX 40 |
Product material |
PA6 polyamide + Stainless steel A4 |
Pre-assembled product |
True |
pattern hexagonal |
TH 13 |
Head shape |
Hex. Head |
Support drilling diameter |
10
mm |
Maximum thickness of the element to be fixed |
90 |
Length |
160
mm |
Minimum drilling depth |
80 |
Minimum depth of implementation |
70 |
Accessory's length |
165
mm |
Content |
50 dowels Ø10/90x160 polyamide with wide flange + 50 pre-assembled A4 stainless steel screws with hexagonal head 13 Torx40 recess with wide flange. |
Load recovery |
138
Kg |
Type of load |
Light load |
Minimum thickness of base material |
120 |
Outside body diameter |
10
mm |
Diameter on thread |
7
mm |
Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Installation temperature ≥ -20°C.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 10 0425 anchors MARCOVIS FMX5
-
DOP cheville MARCOVIS FM X5DOPDownload
-
Fiche Technique MARCOVIS FM-X5 SSTechnical datasheets
This document is reserved for our connected customers,
log in or create an account to download it. -
ETA approval 10-0425 MARCOVIS FM-X5 anchoHomologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF MARCOVIS FM-X5 CL TH 10/90x160Technical drawings
This document is reserved for our connected customers,
log in or create an account to download it.