MARCOVIS FM-X3 TH13/TX40/ZN 10-30/10X80
Generic code 352102
- Polyamide through anchor 10/10-30x80 for solid and hollow materials, with zinc-plated screw with hex head 13 Torx40 recess with standard flange not mounted.
Applications
- Anchor dedicated to non-structural applications in an interior environment.
- Increased expansion designed for facade and heavy carpentry.
Advantages
- Universal extra-flexible high-quality nylon anchor for solid and hollow materials. Delivered complete: non-assembled anchor + screw.
- Maximum tensile strength up to 2000 kg, exceptional performance on all types of materials, solid and hollow.
- Up to 3 installation depths: Ensures versatility of use and a unique fit for multiple applications. Reduced installation depth allows maximum savings in drilling and installation time.
- Dynamic tip: The closed end and conical shape facilitate insertion into the hole. During expansion, this special geometry generates a strong additional expansion which further increases the extraction resistance.
- Increased expansion: The screw and plug work together to create an innovative variable geometry expansion that works even in hollow support materials or irregular holes.
- Fins along the peg ensure proper installation without peg rotation.
- The fins under the head guarantee the adhesion of the plug with the element to be fixed.
- The large flange for fastening metal structures prevents corrosion caused by contact between the bracket and screw.
Technical characteristics
| With flange |
True |
| Installation mode |
hammer laying Installation with torx screwdriving |
| Pattern |
Torx |
| Supporting material |
Solid concrete block cellular concrete Hollow concrete block Natural stone with prior testing Concrete Solid brick Hollow brick |
| Pattern Torx |
TX 40 |
| Product material |
PA6 polyamide + Zinc-plated steel |
| pattern hexagonal |
TH 13 |
| Head shape |
Hex. Head |
| Support drilling diameter |
10
mm |
| Maximum thickness of the element to be fixed |
30/10/- |
| Length |
80
mm |
| Minimum drilling depth |
65 |
| Minimum depth of implementation |
50/70/- |
| Accessory's length |
68
mm |
| Content |
50 dowels Ø10/10-30x80 polyamide +50 zinc-plated screws hexagonal head 13 Torx40 not mounted. |
| Type of load |
Light load |
| Minimum thickness of base material |
100/120/- |
| Outside body diameter |
10
mm |
| Diameter on thread |
7
mm |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETE 19 0245 anchors X3
-
DoP Cheville BARACO LR7DOPDownload -
ETA approval 19-0245 Marcovis anchor FM-X3Homologations
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings DXF MARCOVIS FM-X3 TH13 Tx40 ZN 10xLTechnical drawings
This document is reserved for our connected customers,
log in or create an account to download it.
-
Commercial video
-
Commercial video
