LR IT-FIX TAMIS M10/100x290
Generic code 364374
- Screen chemical anchor system M10/100x290 composite rod, with thermal break for ETI façade.
Applications
- Intended use: All hollow and solid materials with prior testing until 15kg.
- Fixing of elements attached to the facade in ITE: Light cladding, rainwater downpipes, letterboxes, lighting, etc.
- Thermal break system for fixing elements to buildings with external thermal insulation.
Advantages
- Chemical seal with thermal break system.
- Heat loss coefficient de 0.0010 à 0.0020k/w. 0.0010 to 0.0020k/w.
- Fixing in all substrates: hollow, solid, soft and friable.
- Compatible with wood and metal frames.
- 160x better than steel.
- Ensures continuity in the insulating exterior wall.
- No formation of condensation in the building.
- Quick and easy installation. Ideal for new builds and renovation work. Will not compress insulation. Zero corrosion. Avoids damaging the coating.
Technical characteristics
| Thermal conductivity |
0.3
W/MK |
| Supporting material |
Solid brick with prior testing Solid concrete block with prior testing Natural stone with prior testing Hollow concrete block Hollow brick cellular concrete |
| Internal diameter |
M10 |
| Product material |
Fiberglass composite |
| Length |
330
mm |
| Accessory's length |
290
mm |
| Support drilling diameter |
16
mm |
| Maximum thickness of the element to be fixed |
100 |
| Content |
Composition LR IT-Fix TAMIS M10: 1 - Nut M10 Din934 - Stainless Steel A2. 2 - Clamping washer series M - Stainless Steel A2. 3 - Threaded rod M10x290 - Epoxy with 80% fibreglass. 4 - ITE Sieve Ø16x330mm - Polypropylene. |
| Load recovery |
15
Kg |
| Minimum depth of implementation |
130 |
| Required tightening torque |
6 |
| Outside diameter of the washer |
22
mm |
| Drive |
15
mm |
| Minimum thickness of base material |
160 |
| Outside body diameter |
16
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the standard NF EN ISO 10211
-
POMPE SOUFFLANTESee the generic code
-
CHIMFORT KEM-H - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-V - CARTOUCHESee the 2 generic codes
-
CHIMFORT KEM-VEA - CARTOUCHESee the 2 generic codes
-
Foret béton SDS+ 2TSee the 92 generic codes
-
Foret béton SDS+ 4TSee the 53 generic codes
-
GOUPILLONSee the generic code