LR IT-FIX INOX M20/140x270
Generic code 364848
- Chemical attachment system M20/140x270 A4 stainless steel nut+rod, with thermal break for ETI façade.
Applications
- Fastening of roofing supports (insulated panels).
- Fixing of added elements (heavy loads) on ITE facades: Railings, sunbreakers, added cladding, blinds, shutters, rainwater downpipes, walkways, added balconies, staircases, PMR access ramps.
- Thermal break system for fixing elements to buildings with external thermal insulation.
Advantages
- Chemical seal with thermal break system.
- High thermal performance due to the composite materials used.
- Heat loss coefficient = 0.0028 to 0.0081 W/K.
- 160x better than steel.
- Ensures continuity in the insulating exterior wall.
- Eliminates all intermittent thermal breaks.
- No formation of condensation in the building.
- Quick and easy installation. Ideal for new builds and renovation work. Will not compress insulation. Zero corrosion. Avoids damaging the coating.
Technical characteristics
Internal diameter |
M20 |
Product material |
Fiberglass composite + A4 Stainless steel |
Length |
160
mm |
Accessory's length |
270
mm |
Support drilling diameter |
35
mm |
Maximum thickness of the element to be fixed |
140 |
Content |
M20 anchor for chemical anchorage (not included). Threaded rod M20x270 - Stainless steel A4 Ø80x160mm spacer - 20% fibreglass polyester Clamping washer series M - Stainless Steel A4. Nut M20 stainless steel A4 |
Load recovery |
450
Kg |
Required tightening torque |
60 |
Outside diameter of the washer |
40
mm |
Drive |
30
mm |
Outside body diameter |
80
mm |
Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Intermittent thermal break wedges for heavy loads up to 450 kg (for an IT-FIX pair).
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
DiscoverIntegrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
DiscoverSoftware Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the standard NF EN ISO 10211