LR IT-FIX DYNAMIK INOX CM M10/180x290
Generic code 364944
- Mechanical anchor system M10/180x290 A4 stainless steel rod, with thermal break for dynamic load on ETI façade.
Applications
- Intended use: All hollow and solid materials with prior testing until 50kg.
- Fixing of added elements (dynamic loads) on ITE facades: railings, blinds, handrails, awnings, balcony dividers, etc.
- Thermal break system for fixing elements (live loads) to buildings with external thermal insulation.
Advantages
- Mechanical anchor system with thermal break system for dynamic load.
- High thermal performance due to the composite materials used.
- Heat loss coefficient = 0.0016 to 0.0045 W/K.
- 160x better than steel.
- Can be dismantled and recut on site.
- Ensures continuity in the insulating exterior wall.
- No formation of condensation in the building.
- Quick and easy installation. Ideal for new builds and renovation work. Will not compress insulation. Zero corrosion. Avoids damaging the coating.
Technical characteristics
| Internal diameter |
M10 |
| Product material |
Fiberglass composite + A4 Stainless steel |
| Length |
200
mm |
| Accessory's length |
290
mm |
| Support drilling diameter |
15
mm |
| Maximum thickness of the element to be fixed |
180 |
| Content |
Threaded rod M10x290 - Stainless steel A4 2 nuts M10 Din93 Stainless Steel A4 + 1 Clamping washer series M - Stainless Steel A4. Ø35x200mm spacer - 70% fibreglass polyester. M10 mechanical anchor (not included). |
| Load recovery |
206
Kg |
| Minimum depth of implementation |
60 |
| Required tightening torque |
6 |
| Outside diameter of the washer |
22
mm |
| Drive |
17
mm |
| Minimum drilling depth |
80 |
| Outside body diameter |
80
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the standard NF EN ISO 10211
