LR IT-FIX CM M12/160x290
Generic code 364276
- Mechanical anchor system M12/160x290 composite nut+rod, with thermal break for ETI façade.
Applications
- Intended use: All hollow and solid materials with prior testing.
- Fixing of various elements on the façade in ITE: railings, sunbreakers, cladding, blinds, shutters, rainwater downpipes, etc.
Advantages
- Mechanical anchor system with thermal break system.
- High thermal performance due to the composite materials used.
- Heat loss coefficient = 0.03 W/mK.
- Ensures the continuity of the insulating jacket
- Easy and quick to implement.
Technical characteristics
| Supporting material |
Hollow brick with prior testing Natural stone with prior testing Solid concrete block Solid brick Hollow concrete block Concrete |
| Internal diameter |
M12 |
| Product material |
Fiberglass composite |
| Length |
180
mm |
| Accessory's length |
290
mm |
| Support drilling diameter |
18
mm |
| Maximum thickness of the element to be fixed |
160 |
| Content |
M12 mechanical anchor (not included). Threaded rod M12x230mm - Epoxy with 80% fibreglass. Ø80x120mm spacer - 20% fibreglass polyester. Clamping washer series M - Stainless Steel A4. Nut M12 - Epoxy H=2D. |
| Load recovery |
450
Kg |
| Minimum depth of implementation |
80 |
| Required tightening torque |
8 |
| Outside diameter of the washer |
27
mm |
| Drive |
19
mm |
| Minimum drilling depth |
100 |
| Outside body diameter |
80
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the standard NF EN ISO 10211
