LR IT-FIX CM INOX M12/120x250
Generic code 364872
- Mechanical anchor system M12/120x250 A4 stainless steel nut+rod, with thermal break for ETI façade.
Applications
- Intended use: All hollow and solid materials with prior testing.
- Fixing of added elements (heavy loads) on an ITE facade: railing, sunshade, added cladding, blinds, shutters, rainwater downpipe, walkway, added balcony, staircase, PMR access ramp, ...
- Thermal break system for fixing elements to buildings with external thermal insulation.
Advantages
- Mechanical anchor system with thermal break system.
- High thermal performance due to the composite materials used.
- Heat loss coefficient = 0.03 W/mK.
- Ensures the continuity of the insulating jacket
- Easy and quick to implement.
Technical characteristics
| Internal diameter |
M12 |
| Product material |
Fiberglass composite + A4 Stainless steel |
| Length |
140
mm |
| Accessory's length |
250
mm |
| Support drilling diameter |
18
mm |
| Maximum thickness of the element to be fixed |
120 |
| Content |
M12 mechanical anchor (not included) Threaded rod M12x250 - Stainless steel A4 Ø80x140mm spacer - 20% fibreglass polyester Clamping washer series M - Stainless Steel A4. Nut M12 stainless steel A4 |
| Load recovery |
450
Kg |
| Minimum depth of implementation |
80 |
| Required tightening torque |
8 |
| Outside diameter of the washer |
27
mm |
| Drive |
19
mm |
| Minimum drilling depth |
100 |
| Outside body diameter |
80
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the standard NF EN ISO 10211
