INSERT TARAUDE A SERTIR TPR ZN M5X12.5
Generic code 271451
- Zinc-plated threaded insert M5x12.5 to be crimped, reduced flat head.
Applications
- Fastening of weight-bearing parts on a metal structure if through-hole bolted assembly is impossible.
Technical characteristics
| Product material |
Zinc plated steel |
| Outside body diameter |
7
mm |
| Internal diameter |
M5 |
| Type of baseplate |
M5 thread pitch 80 |
| Length |
12.5
mm |
| Support drilling diameter |
7
mm |
| Flange head diameter |
8
mm |
| Minimum nominal grip thickness |
0.3
mm |
| Maximum nominal grip thickness |
2.5
mm |
Sold by case of 200 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover