HEMA DS 8/45x130
Generic code 343095
- Zinc-plated drive anchor with nail 8/45x130 for cellular concrete - single socket.
Applications
- Intended use: Cellular concrete (without starter hole) - Permanent fastening.
Advantages
- Pre-assembled drive anchor to be hammered in.
- Quick to lay, without pre-drilling.
- Non-removable fastening (DS version).
- Fire resistant.
Technical characteristics
| Outside body diameter |
8
mm |
| Length |
130
mm |
| Minimum depth of implementation |
87 |
| Maximum thickness of the element to be fixed |
45 |
| Flange head diameter |
11.5
mm |
| Installation mode |
Hammer laying |
| Supporting material |
Cellular concrete |
| Product material |
Zinc plated steel |
| Pre-assembled product |
True |
| Content |
50 dowel-nails Ø8/45x130 zinc-plated single sleeve. |
| Load recovery |
41
Kg |
| Type of load |
Light load |
Sold by box of 50 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- Benefit from a test report VERITAS dlc 78743910 anchors HEMA
- In accordance with DTU 43. 1: Waterproofing work on flat roofs on masonry.
