HEMA DS 6/40x90
Generic code 343026
- Zinc-plated drive anchor with nail 6/40x90 for cellular concrete - single socket.
Applications
- Intended use: Cellular concrete (without starter hole) - Permanent fastening.
Advantages
- Pre-assembled drive anchor to be hammered in.
- Quick to lay, without pre-drilling.
- Non-removable fastening (DS version).
- Fire resistant.
Technical characteristics
| Flange head diameter |
9
mm |
| Installation mode |
hammer laying |
| Supporting material |
cellular concrete |
| Product material |
Zinc plated steel |
| Pre-assembled product |
True |
| Maximum thickness of the element to be fixed |
40 |
| Length |
90
mm |
| Minimum depth of implementation |
50 |
| Content |
100 dowel-nails Ø6/40x90 zinc-plated single socket. |
| Load recovery |
41
Kg |
| Type of load |
Light load |
| Outside body diameter |
6
mm |
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover