FASTO 233G TH10 Zn 6.5x35G16
Generic code 370110
- Self-drilling screw 6.5x35 with sharp point type 17, hex head 10 natural, mounted with washer Ø16 galvanised steel/epdm, for wood support or steel support 2 sheets max - zinc-plated.
Interested in this product ? Contact us
Applications
- Fastening of panels on steel or wood frames.
Advantages
- Universal screw on steel support (with starter hole) or wood support (without starter hole).
Technical characteristics
| Type of the screw tip |
Countersink sharp point (233 G) |
| With flange |
True |
| Flange head diameter |
13
mm |
| Type of thread |
Single thread |
| Pre-drilling |
With pre-drilling on steel only |
| Anchoring depth |
30
mm |
| Product material |
Zinc plated steel |
| Drilling capacity maxi |
2 x 0.75 |
| Head shape |
Hex. Head |
| Support drilling diameter |
5.95
mm |
| pattern hexagonal |
TH 10 |
| Laquering |
Natural head & washer |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
Galva/ EPDM |
| Outside diameter of the washer |
16
mm |
| Thickness of the flange |
1.2
mm |
| Installation mode |
Installation with hexagonal screwdriving |
| Supporting material |
Steel Wood |
| Diameter on thread |
6.5
mm |
| Thread pitch |
2.54
mm |
| Length |
35
mm |
| Head height |
6.4
mm |
| Minimum clamping capacity |
0
mm |
| Maximum clamping capacity |
0.75
mm |
| Maximum assembly capacity |
18
mm |
| Length of the threaded part |
35
mm |
5 features on 27
| Designation | Article codes | Color label |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Wood anchoring depth for cladding or façade applications: 30 mm min. Wood anchoring depth for roofing or sealing applications: 50 mm min. On a steel support, the max. CA should be the selection criterion. Used with a HH10 screwdriving socket.
Interested in this product ?
Contact us