ETANCOPLAST HP4L 82x40+EGB
- Plastic barrel hitch with 82x40 head mounted with ø4.8 steel screw treated supracoat 2C
Interested in this product ? Contact us
Advantages
- This one-screw pre-assembled system, which can connect to the ANDYPLAST HP installation tool or installation rod, increases productivity when fitting sealing on steel roofing panels.
- Provides thermal bridge break.
- Prevents perforation of the waterproof coating.
- Reduces screw corrosion.
- Facilitates penetration of different sealing complexes + insulation.
- Reduces the heat transfer coefficient fivefold.
- Solid thread
Technical characteristics
Head shape |
Bugle head |
Pattern Philips |
Phillips 2 |
Type of installation of waterproofing |
Traditional mechanical installation |
Pattern |
Phillips (Ph) |
Waterproofing complex |
Solid insulation Semi-rigid insulation Synthetic insulation |
Type of steel sheet |
Full Steel sheet support |
Supplied with |
Plastic barrel attachment with 82x40 head mounted with Ø4.8 supracoat 2C steel screws. |
Diameter of the head |
8,5 mm 8.5 mm |
Drilling capacity maxi |
1.5 |
Drilling capacity mini |
0.75 |
Resistance to corrosion |
15 Kesternich cycles |
Diameter on thread |
4,8 mm 4.8 mm |
External diameter of the spacer |
13,05 mm 13.05 mm |
Screw material |
2C Supracoat coated steel |
Spacer material |
PA6 Polyamide |
Length |
82 mm |
Width |
40 mm |
Thickness |
2,4 mm 2.4 mm |
Pre-drilling |
Without pre-drilling |
5 features on 19
1 generic code
Filter:
Generic code | CE
Waterproofing complex
|
TB
Type of steel sheet
|
LF
(mm)
Barrel length
|
CP maxi
Drilling capacity maxi
|
Df
(mm)
Diameter on thread
|
L
(mm)
Length
|
Ls
(mm)
Accessory's length
|
CS Maxi
(mm)
Maximum clamping capacity
|
|
255110ETANCOPLAST-HP4L 82x40+EGB 2C ISOL.110 | Synthetic insulation,Solid insulation,Semi-rigid insulation | Full Steel sheet support | 50 | 1.5 | 4.8 | 82 | 110 | 110 |
generic codes on
- In accordance with the ETE 08 0239 Couplings WATERPROOFING FASTENERS
- Evaluation of unscrewing resistance according to the standard NF P 30-317
- Conventional test method for step strengh characteristic for fasteners according to the standard NF P 30-317
Find our technical sheets and declarations of performance in the generic code product page.
-
Commercial video
Interested in this product ?
Contact us