DRILLNOX BOIS DF A4+Rd
Interested in this product ? Contact us
Applications
- Fastening sandwich panels on timber frame.
Advantages
- Drill tip and introduction thread made from zinc-plated case-hardened steel.
- Double thread does not damage insulation materials.
- Corrosion resistance greater than 30 Kesternich cycles (excluding drill point)
Technical characteristics
Type of the screw tip |
Small tip |
With flange |
True |
Flange head diameter |
10,5 mm |
Type of thread |
Double hi-thread |
Drilling capacity mini |
0.75 |
Pre-drilling |
Without pre-drilling |
Anchoring depth |
50 mm |
Product material |
Bi-metal (A4 stainless steel / Steel) |
Drilling capacity maxi |
4 x 0.75 |
Head shape |
Hex. Head |
pattern hexagonal |
TH 8 |
Material of the screw head |
A4 Stainless steel |
Laquering |
Natural head & washer |
With washer/ seal |
True |
Type of the washer |
Vulca washer |
Material of the washer/ Seal |
A2 Stainless steel / EPDM |
Outside diameter of the washer |
19 mm |
Thickness of the flange |
1 mm |
Resistance to corrosion |
30 Kesternich cycles |
Installation mode |
Installation with hexagonal screwdriving |
Supporting material |
Wood |
Diameter on thread |
6,5 mm |
Thread pitch |
2,54 mm |
Head height |
5,4 mm |
5 features on 24
8 generic codes
Filter:
Generic code | CP mini
Drilling capacity mini
|
CP maxi
Drilling capacity maxi
|
L
(mm)
Length
|
CS mini
(mm)
Minimum clamping capacity
|
CS Maxi
(mm)
Maximum clamping capacity
|
|
374547DRILLNOX BDF TH8 6.5x142I19 | 0.75 | 4 x 0.75 | 142 | 70 | 90 | |
374561DRILLNOX BDF TH8 6.5x75I19 | 0.75 | 4 x 0.75 | 75 | 15 | 23 | |
374580DRILLNOX BDF TH8 6.5x162I19 | 0.75 | 4 x 0.75 | 162 | 90 | 110 | |
374582DRILLNOX BDF TH8 6.5x177I19 | 0.75 | 4 x 0.75 | 177 | 110 | 125 | |
374727DRILLNOX BDF TH8 6.5x200I19 | 0.75 | 4 x 0.75 | 200 | 125 | 148 | |
374786DRILLNOX BDF TH8 6.5x240I19 (100p) | 0.75 | 4 x 0.75 | 240 | 165 | 188 | |
374791DRILLNOX BDF TH8 6.5x260I19 (100p) | 0.75 | 4 x 0.75 | 260 | 185 | 208 | |
374801DRILLNOX BDF TH8 6.5x300I19 (100p) | 0.75 | 4 x 0.75 | 300 | 225 | 248 |
generic codes on
- In accordance with the ETA 13 0180 screws DRILLNOX DF 2019 undated limit en
Find our technical sheets and declarations of performance in the generic code product page.
Interested in this product ?
Contact us