Advantages
- Special screw to prevent the insulation from being compressed, as the spacer cone limits the tightening to 40 or 60 or 80 mm depending on the model.
- Its double thread prevents deformation of the outer skin during tightening.
- PI > Pilot point: Specially designed for fastening several thin sheets and for drilling all sheets before the thread is inserted into the holder.
Technical characteristics
| Type of the screw tip |
Pilote point (PI) |
| Type of thread |
Double hi-thread |
| Drilling capacity mini |
0.63 |
| Pre-drilling |
Without pre-drilling |
| Product material |
Zinc plated steel |
| Drilling capacity maxi |
4 x 0.75 ou 2.5 |
| Head shape |
Hex. Head |
| pattern hexagonal |
TH 8 |
| Material of the screw head |
Zinc plated steel |
| Laquering |
Painted head & washer |
| With washer/ seal |
True |
| Type of the washer |
Vulca washer |
| Material of the washer/ Seal |
Alu/ EPDM |
| Outside diameter of the washer |
16 mm |
| Installation mode |
Installation with hexagonal screwdriving |
| Supporting material |
Steel Assembly of sheet metal |
| Diameter on thread |
5,5 mm |
| Thread pitch |
1,81 mm |
| Head height |
5,4 mm |
| Length of the threaded part |
13 mm |
5 features on 20
3 generic codes
Filter:
| Generic code | CP mini
Drilling capacity mini
|
CP maxi
Drilling capacity maxi
|
L
(mm)
Length
|
CS mini
(mm)
Minimum clamping capacity
|
CS Maxi
(mm)
Maximum clamping capacity
|
|
| 332070COLORSTOP 2.5DFTH8 ZN 5.5x70A16 |
0.63 | 4 x 0.75 ou 2.5 | 70 | 40 | 40 | |
| 332071COLORSTOP 2.5DFTH8 ZN 5.5x90A16 |
0.63 | 4 x 0.75 ou 2.5 | 90 | 60 | 60 | |
| 332072COLORSTOP 2.5DFTH8 5.5x110A16 |
0.63 | 4 x 0.75 ou 2.5 | 110 | 80 | 80 |
generic codes on
Interested in this product ?
Contact us