CADRE SAUMUR P /PA +Vis TF /Zn
- Polyamide dowel with pozidriv countersunk screw, zinc plated, for frames on masonry.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
- Fixing door and window frames in wood, PVC and aluminium.
Advantages
- Anchor for frames.
- Supplied with pre-mounted screw.
- Mounting with spacing.
Technical characteristics
| Installation mode |
Hammer laying Inslallation with cruciform screwdriving |
| Pattern |
Pozidriv(Pz) |
| Supporting material |
Concrete Solid brick Hollow concrete block with prior testing Cellular concrete with prior testing Solid concrete block with prior testing Natural stone with prior testing Hollow brick with prior testing |
| Product material |
PA6 polyamide + Zinc-plated steel |
| Pre-assembled product |
True |
| pattern Pozidriv |
Pozidriv (Pz) 3 |
| Head shape |
Coutersunked head |
| Support drilling diameter |
10 mm |
| Maximum thickness of the element to be fixed |
105 15 40 60 80 |
| Minimum drilling depth |
70 |
| Minimum depth of implementation |
60 |
| Required tightening torque |
4 Nm |
| Content |
100 dowels Ø10x120 polyamide + 100 zinc-plated TF wood screws Ø6, pre-assembled. 100 dowels Ø10x165 polyamide + 100 zinc-plated TF wood screws Ø6, pre-mounted. 100 dowels Ø10x75 polyamide + 100 zinc-plated TF wood screws Ø6, pre-assembled. 100 polyamide dowels Ø10x105 + 100 zinc-plated TF wood screws Ø6, pre-assembled. 100 polyamide dowels Ø10x140 + 100 zinc-plated TF wood screws Ø6, pre-assembled. |
| Load recovery |
60 Kg |
| Type of load |
Light load |
| Minimum thickness of base material |
100 |
| Outside body diameter |
10 mm |
| Diameter on thread |
6 mm |
| Generic code | d0
(mm)
Support drilling diameter
|
L
(mm)
Length
|
H1
Minimum drilling depth
|
Hnom
Minimum depth of implementation
|
|
| 359068CADRE SAUMUR/P 10x165 | 10 | 165 | 70 | 60 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover