BETOFAST-EVO II INA4 TF TX45 8x110
Generic code 283984
- Bi-metal A4 stainless steel/steel self-tapping screw 10x110, flat countersunk head Ø18, Torx45, for cracked and non-cracked concrete.
Applications
- Intended use: cracked and non-cracked concrete.
- Installation of railings and balustrades, metal frames and profiles, curtain walling and ventilated facades, glazing, support bars, brackets.
- For use in humid environments.
Advantages
- Self-tapping screw, direct fitting without anchor.
- High expansion in friable and hollow materials.
- Very good resistance to tearing.
- Fire approval (TR 020): 120 minutes.
- Removable screw.
Technical characteristics
| Type of load |
Medium load |
| Head shape |
Coutersunked head |
| Installation mode |
Installation with torx screwdriving |
| Pattern |
Torx |
| Outside body diameter |
10
mm |
| Supporting material |
Concrete Cracked concrete |
| Length |
110
mm |
| Product material |
Bi-metal (Stainless steel/ steel) |
| Maximum thickness of the element to be fixed |
25 |
| Support drilling diameter |
8
mm |
| Minimum drilling depth |
75 |
| Minimum depth of implementation |
85 |
| Minimum thickness of base material |
125 |
| Resistance to corrosion |
> = 30 Kesternich cycles |
| Diameter of the head |
18
mm |
| Diameter on thread |
10
mm |
| Head height |
6.1
mm |
| Length of the threaded part |
100
mm |
| Thread pitch |
5.8
mm |
| Diameter of the passage hole |
12
mm |
| Laquering |
Natural head |
Sold by box of 50 pieces
| Designation | Article codes | Color label | Quantity |
Our program of screws and lacquered accessories offers more than 2000 colors for our roofing / cladding / facade applications. Discover the width of our color palette with our lacquering expertise.
- Implementation with wrench.
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover- In accordance with the ETA 19 0051 screw anchors BETOFAST EVO II
-
Drawings DXF BETOFAST EVO II TF A4Drawings 2DThis document is reserved for our connected customers,
log in or create an account to download it. -
Drawings RFA BETOFAST EVO II TF A4 �8x110Drawings 3D RFA
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings IFC BETOFAST EVO II TF A4 �8x110Drawings 3D IFC
This document is reserved for our connected customers,
log in or create an account to download it. -
Drawings STEP BETOFAST EVO II TF A4 �8x110Drawings 3D STP
This document is reserved for our connected customers,
log in or create an account to download it.
-
Commercial video
