BATIFAST TP/ Zn
- Self-tapping screw with flat torx head /white zinc plated, for masonry frames.
Applications
- Intended use: Solid and hollow materials with prior testing - Applications without heavy loads.
- Fixing of frames, frameworks and aluminium and PVC door and window frames.
- Fixing insulation and waterproofing to concrete.
Advantages
- Through-hole mounting, fastenings with spacing.
Technical characteristics
| Type of load |
Light load |
| Load recovery |
400 Kg |
| Installation mode |
Installation with torx screwdriving |
| Pattern |
Torx |
| Outside body diameter |
7,5 mm 7.5 mm |
| Supporting material |
Wood Concrete Solid brick Solid concrete block Hollow concrete block with prior testing cellular concrete with prior testing Natural stone with prior testing Hollow brick with prior testing |
| Product material |
Zinc plated steel |
| Support drilling diameter |
6 mm |
| Required tightening torque |
20 Nm |
| Diameter of the head |
11,5 mm 11.5 mm |
| Diameter on thread |
7,5 mm 7.5 mm |
| Head height |
3,5 mm 3.5 mm |
| Thread pitch |
5,2 mm 5.2 mm |
| Laquering |
Natural head |
| Generic code | T
Type of load
|
T Emp
Pattern
|
D0
(mm)
Outside body diameter
|
L
(mm)
Length
|
Tfix maxi
Maximum thickness of the element to be fixed
|
d0
(mm)
Support drilling diameter
|
Hnom
Minimum depth of implementation
|
|
| 280394BATIFAST TP/Tx30 Zn 7.5x210 | Light load | Torx | 7.5 | 210 | 180/170/150 | 6 | 30/40/60 | |
| 280396BATIFAST TP/Tx30 Zn 7.5x240 | Light load | Torx | 7.5 | 240 | 210/200/180 | 6 | 30/40/60 | |
| 280400BATIFAST TFP/Tx30 Zn 7.5x60 | Light load | Torx | 7.5 | 60 | 30/20/- | 6 | 30/40/- | |
| 280402BATIFAST TFP/Tx30 Zn 7.5x80 | Light load | Torx | 7.5 | 80 | 50/40/20 | 6 | 30/40/60 | |
| 280406BATIFAST TFP/Tx30 Zn 7.5x120 | Light load | Torx | 7.5 | 120 | 90/80/60 | 6 | 30/40/60 | |
| 280408BATIFAST TFP/Tx30 Zn 7.5x150 | Light load | Torx | 7.5 | 150 | 120/110/90 | 6 | 30/40/60 | |
| 280410BATIFAST TFP/Tx30 Zn 7.5x180 | Light load | Torx | 7.5 | 180 | 150/140/120 | 6 | 30/40/60 |
Pull Out test
ETANCO carries out pull-out tests on site to validate the best solution. Following the tests, a report will be provided to you to justify the maximum resistance value of the anchoring in the support material of your site.
Discover
Integrated engineering office
We place our customers at the heart of our priorities to ensure that we listen to them and advise them on a daily basis. Since each application requires different fixing solutions, our design offices are on hand to guide you in your choices. ETANCO will draw up a personalised and adapted calculation note free of charge (according to the regulations in force and the reference documents for each fastener).
Discover
Software Specif Chevilles
Simple, effective and fast, SPECIF determines and calculates the right anchor for your site. Your customised anchor solution.
Discover